Alligator shears Kajman 300L and Kajman 450L
Only one difference between the two shears there is their length of blades !
Concerning the smallest size of shear (as for a cut performance) known on scrap yards like "charing", which completes principle a one of a big either stationary or mobile guillotine shears equipped with cutting force exceeding 4000 kN and mostly combined with a scrap baling. Typical recycled products are there electric cables, aluminium profiles and smaller steel profiles.
For a disposal have got two working cycles there :
- one automatical cut-cycle started by a foot-pedal touch
- a permanent automatical cut cycle controlled by buttons on the electric panel
An easy handling by means of a draw-bar on the own wheels is an advantage.
The machines are fitted with a hydraulic holder of a sheared material
and with an oil preheating of hydraulic system for winter outdoor running.
Technical specification
|
Alligator shears Kajman 400 and Kajman 600
Only one difference between the two shears there is their length of blades !
It concerns about "the most universal and utilized kind of shear" at the classical metal scrap yards or recycling plants of all sizes of automobile catalysts.
For a disposal have got two working cycles there :
- a cycle for a setting of any position between blades and material
controlled by buttons on the electric panel
- a cycle for a setting of any position between blades, but controlled by a tread down
and/or a release of foot-pedal
- controlled by button on the electric panel
- one automatical cut-cycle started by a foot-pedal touch
- a permanent automatical cut cycle controlled by buttons on the panel
An easy handling by means of a draw-bar on the own wheels is an advantage.
The machines are fitted with a hydraulic holder of a sheared material
and with an oil preheating of hydraulic system for winter outdoor running.
Technical specification
|
Alligator shears Kajman 800 and Kajman 1000
 Alligator shears KAJMAN 400 and KAJMAN 600
Only one difference between the two shears there is their length of blades !
It concerns a shear size, where a parameter comparing of a buil-up area and a cut force brings to customer an outstanding performance. This machine size enables to utilize the device "either as a alligator shear or a rail-breaker"; by means of use of an easy jig.
For a disposal have got two working cycles there :
- a cycle for a setting of any position between blades and material
controlled by buttons on the electric panel
- a cycle for a setting of any position between blades, but controlled by a tread down
and/or a release of foot-pedal
- controlled by button on the electric panel
- one automatical cut-cycle started by a foot-pedal touch
- a permanent automatical cut cycle controlled by buttons on the panel
Machine handling is proceed by means of a forklift or a cran.
The machines are fitted with a hydraulic holder of a sheared material
and with an oil preheating of hydraulic system for winter outdoor running.
Technical specification
|
|
Recycling of metal scrap 
